Baroness LM283, Owner'S Operating Manual

Page: 34 / 75

On a level surface, remove the drain
plug, and then drain the old engine oil
into a container.
1
gui678-002
Change of Engine Oil_001
1 Drain plug
Re-place the drain plug.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
Engine oil quantity is approximately 0.34
yd
3
(3.1 L).
Securely install the oil filler cap.
1
gui678-005
Change of Engine Oil_002
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
[2]
[3]
2.
3.
4.
Fuel
Inspection of Fuel Quantity
With the machine on a level surface, observe
the fuel gauge in the operation panel to check
the fuel level.
E F
14
F U E L
1 2
34
1
2e4emp-001
Inspection of Fuel Quantity_001
1 Fuel gauge
LM283
Handling Instructions
Page 4-12 Inspection Before Use