Baroness LM281, Owner'S Operating Manual

Page: 82 / 92

1 Radiator drain cock
2 Container
Remove the radiator cap and drain the
coolant.
2
1
ouuoov-002
Change of Coolant_002
1 Radiator cap
2 Radiator
Remove the reserve tank.
1
2
ouuoov-022
Change of Coolant_003
1 Reserve tank
2 Reserve tank cap
Open the reserve tank cap, and then drain
the coolant.
Install the reserve tank.
Clean the radiator with clean water (soft
water) to remove any debris or rust.
Drain all water from the radiator.
Follow the steps below to fill with coolant.
The coolant quantity, including the reserve
tank, is 6.0 dm
3
(6.0 L).
Install the drain plug.
Supply clean water (soft water) and
antifreeze into the radiator up to the
radiator cap opening.
Close the radiator cap.
[3]
[4]
[5]
4.
5.
6.
7.
[1]
[2]
[3]
Supply clean water (soft water) and
antifreeze into the reserve tank up to the
"FULL" mark.
Close the reserve tank cap.
Start the engine, and then idle for several
minutes to bleed air from the system.
Stop the engine, and then allow the radiator
to cool.
Check if the coolant level in the reserve tank
is between "FULL" and "LOW", and then
supply coolant if necessary.
Close the hood.
[4]
[5]
8.
9.
10.
11.
LM281
Maintenance
Page 5-20
Maintenance Work