Baroness LM281, Owner'S Operating Manual

Page: 60 / 92

Angle Meter
Note:
Depending on the specifications, this function
may not be available.
The angle meter is located in the operation
panel.
This instrument indicates the angle of the
machine position.
1
al3bhj-001
Angle Meter_001
1 Angle meter
Travel of Machine
Traveling Procedure
Caution
Drive the machine at a speed that allows you
to stop immediately in an emergency.
Start the engine.
"Procedure to Start Engine" (Page 4-18)
Raise all mower units, and set the anti-falling
stop valve to the "Stop" position.
Depress the brake pedal, and while pressing
the push button, return the parking brake
lever to its resting position.
1
ukjawr-001
Traveling Procedure_001
1 Brake pedal
Slowly depress the traveling pedal.
1.
2.
3.
4.
The machine starts traveling.
Towing The Machine
If the machine does not travel due to engine
trouble, etc., you can move it in the following
ways:
Important
Do not touch the unload valve except when
towing the machine.
Important
Do not rotate the unload valve two turns or
more.
Important
Before starting the engine, be sure to close
the unload valve.
Important
When towing the machine, travel at a speed
no more than 3.0 km/h.
In addition, do not tow the machine for more
than 3 minutes.
If the towing speed is too fast or the machine
is towed too much, the pump or motor will be
damaged.
Stop the engine.
"Procedure to Stop Engine" (Page 4-19)
Apply the parking brake.
Chock the wheels.
Secure the machine with ropes.
Front side
gay3t1-018
Towing The Machine_001
5.
1.
2.
3.
4.
LM281
Handling Instructions
Page 4-30
Travel of Machine