11
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan lifting microswitch
•
Remove the front panel.
•
Disconnect the device's electrical connections.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan movement motor
•
Remove the front panel.
•
Lower the well completely.
•
Disconnect the device's electrical connections.
•
Detach the connection with the pan lifting "bolt".
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Screw nuts and manual pan movement system (bolt)
•
Remove the front panel.
• Lift the pan completely, locking it firmly in that position
(e.g.with a bar).
Important:
measure how far tightened the
"bolt" is with regard to the screw nut before removing the
components.
•
Disconnect the "bolt" from the handwheel shaft.
• Undo the screw nut fixings.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRIC BRATT PAN
Replacing the heating element
•
Remove the front panel.
•
Remove the screws underneath the heating element box.
•
Remove the terminals cover.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature thermostat, the control knob,
the indicator lamp and the safety thermostat
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan lifting microswitch
•
Remove the front panel.
•
Disconnect the device's electrical connections.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan movement motor
•
Remove the front panel.
•
Lower the well completely.
•
Disconnect the device's electrical connections.
•
Detach the connection with the pan lifting "bolt".
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Screw nuts and manual pan movement system (bolt)
•
Remove the front panel.
• Lift the pan completely, locking it firmly in that position
(e.g.with a bar).
Important:
measure how far tightened the
"bolt" is with regard to the screw nut before removing the
components.
•
Disconnect the "bolt" from the handwheel shaft.
• Undo the screw nut fixings.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
MULTI-PURPOSE APPLIANCE
Replacing the heating element and the indicator light.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the working thermostat and safety thermostat.
•
Remove the control panel.
•
Remove the bulb from its seat on the well.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
17 CLEANING THE INTERIOR
•
Check the condition of the inside of the appliance.
•
Remove any built-up dirt.
•
Check and clean the fumes exhaust system.
18 MAIN COMPONENTS
GAS BRATT PAN
•
Gas valve
•
Main burner
•
Pilot burner
•
Thermocouple
•
Igniter
• Solenoid fill valve
•
Indicator light.
•
Working thermostat
•
Safety thermostat
•
Tank movement motor
•
Tank movement microswitch
•
Tank movement screw nut
ELECTRIC BRATT PAN
•
Heating element
•
Indicator light.
•
Safety thermostat
•
Working thermostat
•
Tank movement motor
•
Tank movement microswitch
•
Tank movement screw nut
MULTI-PURPOSE APPLIANCE
•
Working thermostat
•
Safety thermostat
•
Heating element
•
Indicator light.
