Barnes 30MU, Installation And Operation Manual

Page: 15 / 20

START-UP REPORT FOR
ELECTRIC MOTOR DRIVEN PUMPS
This report is designed to insure the customer that customer service and a quality product are the number one
priority with Crane Pumps & Systems, Inc. Please answer the following questions completely and as accurately as
possible. Mail this form to:
In U.S.A. Send To: In Canada Send To:
CRANE PUMPS & SYSTEMS, INC. CRANE PUMPS & SYSTEMS, INC.
ATTN: WARRANTY SERVICE GROUP ATTN: SERVICE MANAGER
420 THIRD ST. / P.O. BOX 603 83 WEST DRIVE, BRAMPTON
PIQUA, OHIO 45356-0603 U.S.A. ONTARIO, CANADA L6T 2J6
REPORTS THAT ARE NOT RETURNED CAN DELAY OR VOID WARRANTY.
Pump Owner’s Name
Address
Location of Installation
Person in Charge
Phone
Purchased From (Barnes Pumps’ Representative/Distributor)
Pump Model Serial No.
Part Number
Rotation: Direction of Impeller Rotation (Use C/W for clockwise, CC/W for counter-clockwise)
Do Shafts Turn Freely By Hand:
YES NO
Electric Motor Manufacture: Serial No.
Voltage Phase Hertz HP
Rpm Full Load Amps Locked Rotor Amps
Frame Size ODP TEFC Other
Check Line Voltage Frequency Yes No
Check Phase Yes No
Does Above Data Agree with Nameplate? Yes No
Type of Drive: Flex Coupling V-Belt Other
List sizes, types & models:
Condition of Equipment? GOOD FAIR POOR
Condition of Equipment At Start-Up: Dry Wet Muddy
Was Equipment Stored: Length of Storage:
Describe Station Layout
Difficulties During Start-Up:
Liquid Being Pumped
Debris In Bottom of Station?
Was Debris Removed In Your Presence?
(OVER)
Manual Index HOME MENU