Installing the curtains
BAR LOW T Y R IE
quality since 1920
www.teak.com
Page 15 of 16
15
14
025
outside rail
curtains on outside rail
decorative curtains
(installed using velcro strips
on bottom beam groove)
inside rail
curtains on inside rail
TOP VIEW
Velcro Strips
Bottom Groove
16” apart
Profile View
Zipper
(Interior Side)
Metallic
Eyelet
Curtain
(Exterior Side)
Curtain
Exterior Side
Plastic Pulley
Snap Pulley
in place
PL101
Roof fabric and valence
not shown for clarity
Install plastic pulleys
(PL101)
by snapping them in each metallic
curtain eyelet. Use long nose pliers to facilitate this operation.
Pulleys should be facing towards the curtain side on which the
zipper is located (see above steps). Then install each curtain
sections into the provided beam slots as shown by left hand
diagram. After installing all pulleys, block the access with the
screws
(025)
as shown in the diagram. Repeat step for each
corner. See next step (15) for curtain installation example
Curtain Type
Rail
Decorative curtains
Inner or Outer
Mosquito curtains
Inner
Acrylic curtains
Outer
Plastic curtains
Inner or Outer
The decorative curtains are installed using velcro strips
(R3)
inserted
16” apart in the bottom groove of the beams similarly to the valance
in step 13. If you have purchased optional curtains (mesh netting,
transparent plastic or acrylic fabric) install them on the inside or
outside rail of the beams.
