USB ports
The two USB ports are not supported in this release.
Headphone connector
The headphone out is located on the right side of the device’s front side. It is used to listen
to the SonicIP© during the boot only.
Reset button
The reset button is on the left side of the device’s front and is marked with the text “RESET”.
The reset button features four behaviors:
Reset button action
Description
Comments
Short press (<1s)
Device reboots, i.e.
- Application stops cleanly
- Device restarts
Long press (>10s)
Device resets its factory defaults
- All factory settings are set
- Application stops cleanly
- Device restarts with default factory
settings
Press, hold (< 10s) and power
up
Rescue mode
- Device downloads and installs
latest firmware
Device must be connected to the
internet in order to download and install
latest firmware
Press, hold (>10s) and power up
Rescue mode + network factory defaults
- Device downloads and installs
latest firmware
- Device uses DHCP (network
default settings) to deal with IP
address attribution
Device must be connected to the
internet in order to download and install
latest firmware
Power
The device comes with his own external power supply, it is rated with 5VDC 2A.
Do not use any other power supplys which are supplying the device with a different voltage.
The power jack on the power supply to the device is male connector: 5,5 * 2,1 mm.
The power connector on the device is located on the backside.
LAN
The network connector is on the Backside of the device. It is a RJ45 10/100 Mbit Ethernet
interface, autosensing. On the top of the network connector there are two LEDs. As soon the
Released: “Date”
Instreamer ICE
User Manual
9
