Configuration
Network Settings
To configure the device’s network settings, click the “Network” item of the top menu.
To enter the configuration mode, click on the “EDIT” button on the bottom left of the
“Network” section.
At any time, you can click on the “CANCEL” button and void the current changes you made.
To save and activate settings you made, click on “SUBMIT”.
Protocol
Configure here to set the IP address manually (option : “Static”) or to use the automatic IP
address via DHCP (option: “DHCP”). Default setting is “DHCP”.
Choosing DHCP disables the possibility to configure an IP address, netmask or gateway,
because these values are usually assigned from the DHCP server.
DHCP name
If you chose “DHCP”, then you can change the DHCP name of the device that is sent in
DHCP request. When DHCP is enabled and no name is defined then it will use “barix-
ipam400”. Make sure, the same DHCP name is not used twice in your network; therefore, it
Released: “Date”
Instreamer ICE
User Manual
13
