Exstreamer 110, 120, 200 or Annuncicom) to use this feature, otherwise this setting will be
ignored.
Note:
In case of using playlists containing few short music files 2-3 seconds), the relay may
toggle more often.
6.5
Using the IR remote control
To use this feature, you need either the
Barix IR Remote Control Kit
to connect to COM1 of
your Exstreamer 100, or Extreamer 110/120/200 that have IR receiver built in.
To enable the IR remote control, open the
SETTINGS PAGE
, go to
OTHER SETTINGS
section
and click
Yes
to enable the IR receiver. The
IR Source
option will then appear.
Select
serial dongle
if you are using Exstreamer 100 with a serial dongle, or
built-in
if you are
using Exstreamer 110/120/200.
The following commands from the IR remote control are supported:
•
Vol+
- increases the volume in 5% or 3dB steps. Repeated if kept
pressed
•
Vol-
- decreases the volume in 5% or 3dB steps. Repeated if kept
pressed
•
Song+, Plist+ - plays next music file from the playlist
•
Song-, Plist-
- plays the previous sonf file from the playlist
•
Pause
- pauses the playpack
•
Play
- Starts playback
•
Stop
- Stops the playback
•
Mute
Toggles the sound off/on. When muted, it keeps the current volume,
and gradually decreases the audio to the minimum (0%, or -70dB). If Vol+ is
pressed while muted, the volume starts increasing from minimum, and the stored
volume before the Mute is cleared
26
Details
Illustration 7: Enabling the IR remote control