Bard MULTI-TEC W24AAPA, Installation Instructions Manual

Page: 34 / 88

Manual 2100-676B
Page 34 of 88
FIGURE 23
LC6000 Controller Circuit Install
Supply Wiring
The LC6000 controller is powered by 120, 208 or 230 volts from the shelter. Field-supplied supply wiring should
be minimum 16 gauge, maximum 14 gauge (see Figure 23). A reliable earth ground must be connected in addition
to any grounding from conduit. Grounding bolts and nuts are included with the controller for this purpose; a 2 hole
grounding lug must be field supplied. Install as shown in Figure 24.
Failing to ground the controller box properly
could result in damage to the equipment.
FIGURE 24
Controller Grounding Posts
A reliable earth ground must be connected in
addition to any grounding from conduit. Attach
earth ground to side of controller box using bolts
and nuts supplied with controller and field-
supplied 2 hole grounding lug.
Failing to ground
the controller box properly could result in damage
to the equipment.
5 7
9
17
19
21 25 23 27 29 31 35 33 37
11 13
15
39 43 41 45 47 51 49 53 55 59 57 60
6
8 10 12
14
16 18
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58
1
2
3
4
120
VAC
Input
208V
VAC
Input
240V
VAC
Input
Power
Input
Common
Power
Input
Ground