Manual 2100-708A
Page
6 of 17
Install the 3000-1627 wire harness: The 4 pin connector
snaps into the back of the control panel for the
economizer to plug into, the 12 pin connector plugs into
the low voltage box and the orange wires run in the wire
channel and plug onto the sensor wires. See Figure 10.
4 Pin Connector
12 Pin Connector
Route the orange sensor wires up through the lower
control panel bushing and into the wire channel
(see Figure 11). Plug the wires into the 3000-1627
wire harness that plugs into the 12 pin low voltage
connector.
Route the sensor wires over the top of the outdoor fan
motor and up through the condenser partition bushing.
Fasten the wires to the motor mount as shown in Figure
8 using (4) 7950-004 ladder ties provided.
Remove wire channel covers (see Figure 9).
Wire Channel
Covers
FIGURE 8
Route Sensor Wires and Fasten to Motor Mount
FIGURE 9
Remove Wire Channel Covers
FIGURE 10
Install 3000-1627 Wire Harness
FIGURE 11
Route Wires into Wire Channel and Connect to
Wire Harness