Manual 2100-708A
Page
5 of 17
Install the 8301-066 outdoor air sensor as shown in
Figure 7 using the holes provided with two (2) #10-
16x1/2 screws. View shown from left side.
Remove blank off plates (both sides) and discard (see
Figure 4). Retain all screws for use with new vent.
Remove exhaust blank off plate through return or
through side intake openings and discard (see Figure 5).
Blank Off Plate
FIGURE 4
Remove Blank Off Plates (Both Sides)
FIGURE 5
Remove Exhaust Blank Off Plate
Remove both air filters and the low voltage inner control
panel cover (see Figure 6). Remove left filter first then
slide right filter to the left to remove.
Air Filters (2)
Low Voltage Inner
Control Panel Cover
FIGURE 6
Remove AIr Filters and Low Voltage
Control Panel Cover
Outdoor Air Sensor
FIGURE 7
Install Outdoor Air Sensor
Exhaust Blank Off
Plate
Exhaust Partition
