~ 16 ~
b The LCD segment screen does not display anything in standby mode.
B.
Voice control Standby:
Push the VOX switch to "ON" and turn the power switch to "ON", the system will start working and it will enter
preview state after finishing initialization. In case of no any mission and operation, and the environmental voice
is lower than 65dB continuously, the system will auto enter standby power-saving mode at the end of the auto
standby time set. Press "Record" or "Shutter" key at this time, or remote control any key on the remote control,
the system will be waked up. When the environmental voice is higher than 65dB, the system will wake up and
enter video recording state.
Note:
a To press keys on TFT screen in standby mode cannot wake up the system;
b The LCD segment screen does not display anything in standby mode.
9.
AV output connection:
In preview state, connect FOOLISH with the display device with AV cable, and then all functions of FOOLISH
can be operated.
Note:
After connecting with audio and video display device, TFT screen on FOOLISH and the voice will be turned off,
and the audio and video will be displayed on the display device. LCD segment screen on FOOLISH will display
the corresponding function operations normally.
10.
HDMI output connection: In preview state, connect FOOLISH with the high-definition display device with
HDMI cable, and then functions of 5D19 can be operated; however, digital zoom function cannot be
operated in720P/1080P mode;
Note:
a.
After connecting with HDMI display device, TFT screen on FOOLISH and the voice will be turned off, and
the audio and video will be displayed on the display device;
b.
FOOLISH may be in abnormal state if the HDMI cable is inserted or unplugged improperly when connecting.
It can be recovered after re-starting and LCD segment screen will display the corresponding function
operations normally.
11.
USB connection:
a.
When there is no preset battery in FOOLISH , use USB power adapter to connect with FOOLISH , all
functions can be operated (meanwhile, LCD segment screen and TFT display screen will display the
corresponding operation prompts);
b.
ln startup state, use USB cable to connect with the computer, data stored in FOOLISH memory and the
Micro SD card can be read (at this time, LCD segment screen will display the USB connection state icon);
c.
FOOLISH may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting,
and re-start to recover.
12.
Prompt of key tone:
a.
Press "Record" or "Shutter" key once in normal using, FOOLISH will tick once to indicate the
