![background image](http://html.mh-extra.com/html/barco/xdm/xdm_installation-manual_474400065.webp)
65
R5914477 /00
XDM
Warning:
Use a minimum of four (4) rigging points, equally spread, to suspend the projector.
Make sure the clamps are capable of handling five (5) times the complete load of the system.
X m
m
Image 4
–
30
3.
Place the projector under the truss installation with the clamps facing upwards. Lower the truss until the
support bars of the truss are close enough to connect the rigging clamps.
Warning:
Always secure the rigging points after adjustment.
Image 4
–
31 Example of mounting to truss
4.
Lock all four rigging clamps.
5.
Secure the reinforcement frame and truss installation using safety cables.
Warning:
Make sure the safety cables are mounted on the longest bars on the side of the frame
that faces the truss beam (the same bars as used for the clamps).
Warning:
Make sure all safety cables are applied according to local regulations and standards.
Safety cables must be dimensioned for the applicable load and no drop distance is allowed or
must be limited as much as possible.
6.
Lift up the truss with the attached projector to the desired height.
Summary of Contents for XDM
