R5914477 /00
XDM
52
Image 4
–
9
4.
Guide the AC power cord (reference 2) through the cable gland (reference 3). Connect the wires
(references 4 and 5) to the 3
–
terminal strip (reference 6) as illustrated. Use a torque screwdriver to fasten
the screws of the 3-terminal strip with a torque of
1.7Nm
(1.25 lbf*ft).
Warning:
Always connect the PE wire (reference 4) first, then the other wires.
3
2
4
6
5
Image 4
–
10
2
UPS Power cord
3
Cable gland
4
PE wire
5
Other power wires
6
3
–
terminal strip
Tip:
Check for good fixation by pulling on each wire.
5.
Secure the AC power cord by fastening the cable gland (reference 3). Use a 24 mm open-end wrench.
6.
Place the net input cover back and seal it. Tighten the two screws (reference 1), using a T20 Torx
screwdriver.
Summary of Contents for XDM
