1.
Place the primary lens lock in “unlock” position. Handle (ref. 1) towards electrical socket (ref 3).
2.
If present, remove the plastic protection cover from the lens holder opening.
3.
Check if the secondary lens lock stands in the “ulock” position (ref 2).
4.
Gently insert the lens. Ensure the lens connector matches the electrical socket on
the lens holder.
5.
Insert the lens until the connector seats into the socket.
- The secondary lens lock (ref. 2) makes an audible clicking sound when latching.
- Do not release the lens holder by sliding the primary lens lock handle into the
“locked” position.
6.
Check if the lens touches the front plate of the Lens Holder.
7.
Check if the lens is really secured by trying to pull the lens out of the lens holder.
Start up
1. Power on.
Turn the mains switch to on ( I ).
- Startup sequence starts. Backlight of the Power on / off button flashes WHITE.
- When startup sequence is finalized the Power on / off button will be lit WHITE.
2. Press the Power on / off button.
- The backlight of the Power on / off button changes from WHITE to BLUE.
- local LCD displays a startup screen.
Connect power
Ensure that the power is properly connected to the power input.
(120-180V / 200-240V, 60 - 50Hz).
Install Lens !! ONLY USE TLD+ Zoom Lenses !!
2
1
1
2
3
2
1
