Barco Trace+ R9040341, Owner'S Manual

Page: 129 / 151

8. Service Mode
How to display the Identification Screen?
1. Push the cursor key ↑ or ↓ to highlight
Identification
. (menu 8-3)
2. Press
ENTER
to select.
The Identification Screen will be displayed. (menu 8-4)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
LAMP
MORE ...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-3
Trace+
Proj. address : 006
Soft. version: 1.50
Config : FRONT
TABLE
Baudrate PC : 57600
Text: ON
Serial No. : 1243439
Run Time : 164 hrs
<EXIT> to return
Menu 8-4
8.5 Change Password
How to Change the Password?
1. Push the cursor key ↑ or ↓ to highlight
Change Password
. (menu 8-5)
2. Press
ENTER
to select.
The
Change Password
menu will be displayed. (menu 8-6)
4 ’_’ characters are displayed. A new password can be entered with the digit keys of the RCU or local keypad. Every time a digit
is entered, a ’X’ appears on the screen. The confirm new password is still grayed out.
3. Do you want to activate the new password?
If yes, Press
ENTER
to confirm the new password.
4 ’x’ characters are displayed in the confirm new password area. Key in your password again with the digit keys of the RCU or
the local keypad.
If the confirm new password entry is the same as the entered new password, the password is changed.
If no, Press
EXIT
if no changes have to be made.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
LAMP
MORE ...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-5
CHANGE PASSWORD
Enter new password
_ _ _ _
Confirm new password
_ _ _ _
Select with
←
or
→
Reprogram with
numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 8-6
8.6 Change Projector Address
What can done?
Within the Change Projector Address menu, following items can be changed:
•
Projector Address
• Common Address
For more information on Common and Projector Address see ’Controlling the projector’ in the chapter ’Getting
Started’.
R5976781 TRACE+ 14/09/2004 125