![background image](http://html1.mh-extra.com/html/barco/thor/thor_user-manual_4099263057.webp)
5. ICMP
Image 5-16
4. Pull the HDD out of its slot.
Image 5-17
To install the HDD see procedure "Installing a HDD into the ICMP", page 53.
5.16 Installing a HDD into the ICMP
This procedure assumes that the HDD slot of the ICMP is empty. If not, see procedure "Removing a HDD from
the ICMP", page 52.
C
AUTION
:
Always use a new empty spare part HDD approved by Barco to replace a malfunction HDD. Do not
use a HDD from another ICMP HDD set.
C
AUTION
:
Always make sure that all HDDs in the ICMP HDD set have the same storage capacity. See label
on top of the HDD to know the storage capacity.
How to install a HDD ?
1. Ensure that the projector is switched off.
2. Prepare the HDD for insertion by moving the latch towards the left and push the unlock button to open the handle.
R5906787 THOR 26/01/2018
53
Summary of Contents for Thor
