Barco Thor, User Manual, Page: 56 / 76

5. ICMP
5.14 Obtaining the Barco ICMP certi fi cate
Necessary tools
Smartphone (with auto-focus) or control software (e.g. Communicator, Commander or WEB Commander)
Using the CertID label to download the ICMP certi fi cate
1. Scan the QR code (reference 1) on the front face of the ICMP with a smartphone. It’s recommended to use a smartphone with
auto-focus. The QR reader will automatically redirect to the ICMP certi fi cate download page on the web server.
Note: Instead of downloading the ICMP certi fi cate you can use the CertID number (reference 2), located below the QR code,
in communication with your KDM supplier. Certi fi ed KDM suppliers can use this CertID number to retrieve the ICMP
certi fi cate directly.
96 92 35 86 40
1
2
Image 5-14
Using control software to obtain the ICMP certi fi cate
1. Use the WEB Commander to download the ICMP certi fi cate from the ICMP main board. For detailed instructions see user guide
of the WEB Commander.
Or,
use the
Commander to download the ICMP certi fi cate from the ICMP main board. For detailed instructions see user guide of
the Commander.
Or,
use the
Communicator to download the ICMP certi fi cate from the ICMP main board. For detailed instructions see user guide
of the Communicator.
5.15 Removing a HDD from the ICMP
In case the ICMP has to be returned to factory (e.g. for repair) the non defective HDDs should be removed and
kept.
How to remove a HDD ?
1. Switch off the projector.
2. Moving the latch towards the left.
Image 5-15
3. Push the unlock button to open the handle.
52 R5906787 THOR 26/01/2018