![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408147.webp)
7. Advanced
Link In
fi
tec Set can only be performed if the linked CLO has been enabled, see
Linked Projectors
.
7.9.7
Color temperature
What can be done ?
The color temperature can be selected from a list of presets. As a matter of fact, changing the setting of the color temperature is
changing the x and y position of the white point in DynaColor.
There are 4 different preset color temperatures:
•
Projector white
•
Computer : 9300 K
•
Video : 6500 K
•
Film : 5400 K
If
Disabled
is selected, the default Dynacolor white point is selected.
Since Color Temperature basically is a DynaColor setting, linking projectors for Dynacolor will also force the
Color Temperature settings from the master to the slave projectors..
How to select a preset color temperature ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Display setup
item
3. Press
↓
to Pull down the
Display setup
menu
4. Use
↑
or
↓
to select
Color temperature
5. Press
→
to pull down the menu
6. Use
↓
or
↑
to select the desired preset color temperature
7. Press
ENTER
The color temperature of the image is adapted and a bullet shows the active setting.
Image 7-165
7.9.8
Brilliant Color
TM
Mode
What can be done ?
Brilliant Color
TM
(Texas Instruments
TM
technology) allows to use secondary colors in the process of the image (cyan, magenta, and
yellow), resulting in an increase of the color gamut and the overall brightness.
Depending on the type of color wheel, the contribution of the Brilliant Color Mode can be adjusted in 2 or in 4 levels:
R59770324 SIM 5W 22/12/2011
143
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...