50
RLM
W12
OSD Menu description
2. Color matching 2 projectors on white is done with P7 (R.G.B.C.M.Y.W) adjust in projector
toolset.
3. Brightness matching 2 projectors can be done with the lamp power(Refer to
adjustment by dimming the projector with higher lumens.
4. Use ScenergiX-> White level to set the blending size based on the overlap
region size.
Use ScenergiX-> Black level position to adjust the start position of black level
compensation.
Use ScenergiX-> Black level to raise the brightness of non-overlap zone such
that the brightness of the overlap zone and non-overlap zone are matched for
black level.
Note1: Please note that the following allowable warp, blanking and ScenergiX combination
based on the underlying chip specifi cation
Note2: ScenergiX / 4 corner combination is available when black level is not adjusted.
Note3: Blend along corners is available when black level is not adjusted.
Black Level Black Level
Black Level
Keystone Rotation Pin/Barrel 4-corner blanking
Top/Bottom or
Left/Right only
Blend along corners Black Level
Keystone
X
X
X
X
X
X
X
Rotation
X
X
X
X
X
X
X
Pin/Barrel
X
X
X
X
X
X
X
4-corner
X
X
X
OK
OK
OK
X
blanking
X
X
X
OK
OK
OK
OK
Top/Bottom or
Left/Right only
X
X
X
OK
OK
OK
Blend along corners
X
X
X
OK
OK
X
X
X
X
X
OK
OK
X
ScenergiX
S
c
e
n
e
rg
iX
White Level
White
Level