32
RLM
W12
OSD Description
1. Press the MENU button on the remote control or on the back of the projector to
bring up the OSD Menu.
2. You will see seven functional menus (Input, Image, Layout, Lamp, Alignment,
Control and Service). Press
◄
or
►
to select the desired sub menu.
3.
Press ▲ or ▼ to select the desired sub menu.
4. Your current selection in each of the sub menu will be displayed in yellow text and
highlighted in blue. Press
◄
or
►
to access the confi guration for the selected
item or press ENTER to go to another sub menu.
5. Press
MENU
to return to the previous menu.
6. From the main menu, press
MENU
to close the OSD Menu.
INPUT
Input Selection
Inupt Configuration
Input Locking
Auto Power Off
Auto Power On
No Signal
Video Standard
Auto Image Adjust
Enter
< ----- >
< ----- >
< Off >
< Off >
< Logo >
< ----- >
< ----- >
Input Selection
Use this function to specify the source of image connected to the rear of the projector. For
instance, if you have connected your PC as the video input source,
you can choose RGB D-15(RGB-HV/SOG) to be the input for image projection.
Options of input available on the projector include:
HDMI1, HDMI2, RGB D-15(RGB-HV/
SOG), YUV1(RGB-S), YUV2(RGBHV/YUV2), Composite Video(Video), S-Video, RGB-S,
SDI/HDSDI/3G. STEREO DVI.
Input Locking
Use this function to specify the frequency of the image input signal. You can let the projector
determine the optimal projection frequency or force the projector to project image at the
frequency you specify.
•
Auto
The preset value for this function is
Auto
. If you specify vertical refresh frequency from the
input device to be between 48~62Hz, the projector will automatically lock the frequency
of the input signal so that both signal input and output will be refreshed at the same
OSD Menu description