16
RLM
W12
b. Press the
MENU
button on the remote control and choose Alignment
Lens Control
to activate the Lens Control OSD, press enter to go through "Zoom/Focus", "Lens
Shift", "Zoom/Focus with Grid test pattern", "Lens Shift with Grid test pattern" OSDs
Cyclically. Stop at either "Zoom/Focus" or "Zoom/Focus" with Grid test pattern" OSD;
then use the
▼▲
buttons to adjust the size of the image that is projected onto the
screen.
Original image size
Zoom out
Zoom in
7. Correcting keystoning caused by projection angle
a. To adjust keystoning, press the MENU button on the remote control and choose
ALIGNMENT
Warp
Keystone and use
▼▲
buttons to adjust Vertical Keystone.
b. To adjust keystoning,
press the MENU button on the remote control and choose
ALIGNMENT
Warp
Keystone and use
▲ ▼
buttons to adjust Horizontal Keystone.
8. Turning off the projector
Press the
STBY
button on the projector or the
button on the remote control at
least 3 seconds to turn off the projector. When the projector has been turned off, the cooling
fan will remain in operation for approximately 90 seconds.
Quick installation of the projector