Barco RHDM-1701 User Manual Download Page 109

Page: 109 / 256

Barco - RHDM-1701 - User manual 109

Full functionality description

4.2.7.2 Navigation pad functionality

The trackball is used to navigate through the menu and to move the pointer on the screen (when
present).

Description

Sel button

. Behaves like the left mouse button. This button selects items and confirms

changes of an item. It can also be used to drag or pan (together with the trackball).

Menu button

. The OSD menu is opened by pressing the menu button.

Option button.

Behaves like the right mouse button. This button calls for the options.

E.g. choose between pan and zoom when working in Pan&Zoom-mode.

Summary of Contents for RHDM-1701

































































































































































































































































Search results

Summary of Contents for RHDM-1701

Reviews:

Related manuals for RHDM-1701

Brands by name

Popular brands

Barco RHDM-1701, User Manual

Search results

Summary of Contents for RHDM-1701

Reviews:

Related manuals for RHDM-1701

Brands by name

Popular brands