Barco R9851590, Owner'S Manual

Page: 34 / 47

6. Configuration Schemes
4. Connect the first background source to an input of the upper digitizer.
5. Connect the second background source to the equivalent input of the lower digitizer.
6. Connect this input from the lower digitizer to a free input of the same type on the upper digitizer.
7. Loop all input with a video source connected too, through from the upper digitizer to the lower digitizer.
6.7 Chained – Stacked configuration without background
Scheme
Image 6-7
The input types of the upper digitizer must correspond with the inputs on the lower dig-
itizer.
How to set up communication
1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the
master ViewScape Digitizer (upper digitizer).
2. Connect COM2 of upper digitizer of master ViewScape digitizer with COM1 of upper digitizer of next
slave ViewScape digitizer.
3. Connect COM3 of upper digitizer of master ViewScape digitizer with COM1’ of lower digitizer of master
ViewScape digitizer.
30 R5976474 VIEWSCAPE DIGITIZER 26022003