Barco R9851590, Owner'S Manual

Page: 27 / 47

6. Configuration Schemes
6. CONFIGURATION SCHEMES
6.1 Stand alone configurations, without background
Scheme
Image 6-1
Stand alone configuration without background
The input types of the upper digitizer must correspond with the inputs on the lower dig-
itizer.
How to set up
1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the
ViewScape Digitizer (upper digitizer).
2. Connect COM3 of upper digitizer with COM1’ of lower digitizer.
3. Connect the LOOP OUT of the upper digitizer to the LOOP IN of the lower digitizer.
4. Connect the OUTPUT from the upper digitizer with the projector input of the first screen.
5. Connect the OUTPUT from the lower digitizer with the projector input of the second screen.
6. Provide the available video sources to the upper digitizer input modules.
7. Loop all input through from the upper digitizer to the lower digitizer.
8. Configure the ViewScape Digitizer and the Display with the control software installed on the local control
PC.
6.2 Stand alone configurations, with overlapped background
Overlapped background
Background is composed of multiple inputs which arange the overlap in the source.
R5976474 VIEWSCAPE DIGITIZER 26022003 23