![background image](http://html1.mh-extra.com/html/barco/r9841020-cine-versum-master/r9841020-cine-versum-master_installation-manual_4236570135.webp)
18. Additional settings Cine VERSUM Master
Image 18-4
•
Press the key
TEXT
on the Remote Control. The OSD’s, included Menu, Bar scale and Message are disabled. To reactivate
the OSD, press the key
TEXT
again. Attention, only the OSD’s (including MENU, BAR SCALE and MESSAGE) with status ’On’
will be active again.
•
Via the OSD configuration menu. Disabling and enabling the display (=changing the status) for respective Menu, Bar scale and
Messages, has to be done for each item separately.
18.5.2 Status Change of the OSD
How to change the status of the OSD
The status of the OSD can be changed in the OSD Configuration menu. The menu is displayed on-screen, if status of the Menu is
set to ’on’, and in the graphical display on the Cine VERSUM Master. In case of a non active Menu OSD (=status ’Off’), refer to the
menu in the graphical display on the Cine VERSUM Master.
1. Select the INSTALLATION menu using the respective keys on the Remote Control or the jog dial on the Cine VERSUM Master.
2. Select item
OSD CONFIGURATION
by rotating the jog dial on the Master or the
↑
or
↓
keys on the Remote Control.
3. Press the jog dial on the Master or the key
ENTER
on the Remote Control to confirm.
The sub menu OSD CONFIGURATION appears on-screen (If Menu status is ’On’) and in the graphical display, including the
status setting of the bars cale, the menu and Message as well as the alignment of the position of it (not for the Message box).
(menu 18-6)
4. Select the OSD item you want to change the status by rotating the jog dial on the Master or the
↑
or
↓
keys on the Remote Control.
5. Press the jog dial on the Master or the key
ENTER
on the Remote Control to toggle the status from On to Off or back to On.
6. Press
EXIT
on the Remote Control to return or select BACK in the menu by rotating the jog dial on the Master or the
↑
or
↓
keys
on the Remote Control, confirmed by pressing the jog dial or the
ENTER
key.
OSD Configuration
Menu Status [On]
Menu Position
V:[Center]
H:[Center]
Barscale Status [On]
Barscale Position
V:[Center]
H:[Center]
Message Status [On]
Back
Menu 18-6
R5976468 CINE VERSUM SYSTEM 03112003
131
Summary of Contents for R9841020 Cine VERSUM Master
