Barco R9001490, Owner'S Manual

Page: 57 / 93

7-4
Random Access Adjustment Mode
5976072 BARCOELM R12 17012000
Edit File
What can be done with the Edit File menu ?
The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specification before entering the data.
How to start up the EDIT menu ?
1 Push the cursor key é or ê to highlight 'Edit' (menu 1).
2 Press ENTER to select.
The Edit file adaptation menu will be displayed (menu 2).
3 Select the file which must be edited (mostly the active file).
4 Press ENTER .
The file name will be displayed in the upper right corner.
EDIT FILE xga.s30
HORIZONTAL
TOTAL
1344 PIXELS
ACTIVE 1024 PIXELS
S T A R T 296 PIXELS
PERIOD 20.678 µS
VERTICAL (FIELD)
TOTAL
806 LINES
ACTIVE 768 LINES
S T A R T 36 LINES
INTERLACED [OFF]
READ AMDS
OPTIONS
é
,
ê
,
ç
,
è
<ENTER>, <EXIT>
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
D E L E T E
OPTIONS
EDIT FILE
Filename Src Resolution
-----------------------------------------------------
Video525.s01 1
675x240i
Video525.c01 1 675x240i
Video525.c02 1 675x240i
-----------------------------------------------------
Active file : Video525.c50
Select with
é
or
ê
,
è
<ENTER> to accept
<EXIT> to return.
menu 1 menu 2
Which items can be adjusted ?
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal start in pixels
Horizontal period in µs (is automatically adapted during the installation of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of a file with LOAD)
Active vertical lines
Vertical start in lines
Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD)
All settings can individually be changed.
How to change the settings ?
1 Push the cursor key é or ê to select an item.
The color of the selected item will change and follow one of the three methods to change the value.
a. method 1:
1 press ENTER to activate the digits
2 enter directly with the numeric keys on the RCU or local keypad the new value or
b. method 2:
1 Press ENTER to activate the digits
2 Push the cursor key è or ç to select the changing digit.
3 Push the cursor key é or ê to scroll to desired digit.
4 When finished press ENTER to confirm.
c. method 3
1 Counting up or down by pushing the cursor key è or ç .