3-5
Installation Guidelines
5976072 BARCO ELM R12 17102000
Installing the projection lamp.
1 Unplug the projector from the wall outlet.
2 On the input side of the projector, remove the side by turning the 3 bolts a quarter turn counter clockwise (image 8).
3 Flip the lower side of the plate a little and pull then downward to remove the plate.
4 Take the lamp casing carefully out of its shipping box.
5 Place the lamp casing on the optical base plate (image 9).
6 Push the lamp casing forward until the lamp slide fully into the projector (image 10 & 11). Both center pins (image 12) must match
both center holes.
7 Secure the correct position by turning both bolts a quarter turn clockwise (image 13).
8 Reinstall the projector side panel.
Image 8
Image 9
Image 10
Image 11
A
Image 12
Summary of Contents for R9001490
