Barco QVD 3.0-6.0:1, Installation Manual

Page: 4 / 5

BARCO ——————————————————— 3 ————————————— Projection Systems
Installing the QVD(3.0-6.0:1) Lens
What has to be
done
The lens has to be installed on a IQ series projector
Necessary Tools no tool necessary
Installing the
Lens
To install the lens, follow the next procedure or look into the owner’s manual :
Warning ! Risk of personal injury. Instructions for lens installation must be followed thoroughly.
Use the dedicated keys on the RCU to perform zoom/focus or shift the lens (image3).
To focus or zoom the image :
Push + or - on the key A to zoom the image.
Push + or - on the key B to focus the image.
To (verticaly) shift the image :
Push é or ê on the key C to shift the image.
Adjusting the
Lens
1
2
3
4
5
page 2
1&2
page 2
Take the lens out of its packing material.
Slide the lensdoor of the projector to the left.
Fix the lens by placing it in the housing, the female jack
must be in front of the male jack located in the upper left
part of the housing in the projector
Push carefully to lock (“click” sound) the lens in the housing
Slide back the lens door to the right
Step Action Image
9
7
5
3
1
0
8
6
4
2
F1
F2
F3
ENTER
MENU BACK
LENS
ZOOM
LENS
SHIFT
LENS
FOCUS VOL
CONTR
BRIGHTN
COLOR
TINT
DIGI
ZOOM
PHASE
PAUSE
PIP
LOGO
A
B
C
Image 1
Image 2
Image 3