Installation
Barco - OV-808, OV-815– R599874 – installation manual – revision 01– November 2007 ___________________________________________________________ 19
Step 07
Mount the additional 90° corner brackets R856527 on
the mid front connection.
Make sure that the open sides of the brackets on the
x-profile show inside!
You have to unscrew the screw mounted to the mid
front connection. Use this screw to fix the corner
bracket to the horizontal profile.
On the vertical profile, slid the corner bracket with its
keyhole into the screw.
Fix all screws.
Step 08
Mount the stiffening bracket R858208 between the
left and the right pedestal sidewalls.
First remove the upper screw indicated in the details:
When all KANYA connectors are tightened, it is
impossible to slide in the stiffening bracket when the
upper screw on the vertical profile is there. In spite of
the keyhole provided on the stiffening bracket for
this screw, this screw has to be removed from the
profile, and, after the stiffening bracket has been put
on place, screwed in again.
The lower screw on the profile however nicely slides
into the opening.
Summary of Contents for OV-808
Page 1: ...Installation manual OV 808 OV 815 R599874 ...
Page 15: ......
