Barco OV-808, Installation Manual

Page: 10 / 84

1. Introduction
Barco - OV-808, OV-815– R599874 – installation manual – revision 01– November 2007
______________________________________________________________________
5
1.2.4 Placement
Place the device in a well-ventilated area away from sources of ignition and out of direct sun light. Never expose
this product to rain or excessive moisture
Slots and openings in the cabinet or bottom are provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must not be blocked or covered.
Exposing flammable or combustible materials into close proximity of this device could result in the spontaneous
ignition of that material, resulting in a fire. For this reason, it is absolutely necessary to leave an "exclusion zone"
around all external surfaces of the device whereby no flammable or combustible materials are present. The
exclusion zone must be not less than 10 cm (4").
•
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
1.2.5 Operation
Barco products are designed and manufactured to meet the most stringent safety regulations.
During operation, the equipment
radiates heat on its external surfaces and from ventilation ducts, which is
both normal and safe.
•
Do not cover the equipment with any material while the equipment is in operation.
• Do not block the cooling fans or free air movement under and around the device.
•
Keep flammable and combustible materials away from the device at all time.
In the event of fire, use sand, CO2, or dry powder fire extinguishers; never use water on an
electrical fire.
Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
•
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short cut parts that could result in a risk of fire or electrical shock.
•
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the
set and have it checked by qualified service personnel before resuming operations.
Adjust only those controls that are covered by the operating instructions since improper adjustment of the other
controls may result in damage and will often require extensive work by a qualified technician to restore the
product to normal operation
Lightning - For extra protection for this video product during a lightning storm or when it is left unattended and
unused for a long period of time, unplug it from the wall outlet. This will prevent damage to the unit due to
lightning and AC power-line surges.
1.2.6 Servicing
Never open the case of a device without first disconnecting the power supply cord!
Measurements and tests with an opened device may be carried out only in the factory or
by specially trained personnel, due to the dangers of electrical shock.
Do not attempt to service this device yourself, as opening or removing covers may expose you to dangerous
voltage potential and risk of electric shock! Refer all service to a qualified BARCO service center.
Always have service performed on this product by authorized BARCO service personnel. Always insist on genuine
BARCO replacement parts. Never use non-BARCO replacement parts as they may degrade the safety of this
device.