8. Cabling of an OLite rental display
Image 8-5
Insert the plug into the socket and turn the locking cap as far as possible.
Warning:
Ensure that the locking cap of each plug is turned clockwise as far as possible until you feel a “click”.
4. Place the OLite control box back in the tile.
5. Connect the four cable strings with the OLite controller output ports as illustrated in image 8-4.
6. Place a dummy plug on the unused output ports 5 and 6 of the OLite control box.
Warning:
To meet the demands of the IP65 protection norm a dummy plug must be placed on the every unused output ports
of the OLite control box.
Note:
Normally the OLite control box is delivered with a dummy output plug on the output ports 5 and 6.
Image 8-6
Dummy plug (
Z3499467
) for unused output ports of
the OLite control box.
Image 8-7
Dummy plug place on the unused output ports 5 and 6 of the OLite control box.
R5976832 OLITE RENTAL DISPLAY 15/12/2004
47
Summary of Contents for OLite 510
