Barco NW-12 User Manual Download Page 99

Page: 99 / 181

7. Advanced

Image 7-73

How to adjust using the Adjust mode ?

Adjusting in the

2x2

mode the (row =0 ; Colom =0) by 100 (pixels) along the x axis

1. Press

ENTER

to go to the

Adjust Mode

The

Adjust mode

is selected

Image 7-74

2. Use

←

and

→

to adapt the value of

PixelsX

Tip:

Use

↑

and

↓

to adapt the value of PixelsY

The image is distorted along the X axis. Notice the unaffected regions.

The adjustment is done in small steps. Adjusting for instance from 0 to 100 using the

Adjust mode

is not the

ideal method. The use of the

Edit

and

Change mode

is more appropriate.

How to adjust using the Edit and Change mode ?

Adjusting in the 2x2 mode the (row =0 ; Colom =0) by 100 (pixels) along the x axis
1. Press 2 times

ENTER

to go to the

Edit Mode

R59770286 NW-12 25/09/2008

Summary of Contents for NW-12






















































































































































































Search results

Summary of Contents for NW-12

Reviews:

Related manuals for NW-12

Brands by name

Popular brands

Barco NW-12, User Manual

Search results

Summary of Contents for NW-12

Reviews:

Related manuals for NW-12

Brands by name

Popular brands