Barco Nio Color 5MP MDNC-6121, User Manual

Page: 30 / 47

4. Advanced operation
About grayscale conversion modes
Grayscale conversion modes specify how color generated on the display controller is converted to
grayscale in your display.
The available grayscale conversion modes are:
No Conversion
Use Red Channel
This mode is intended for grayscale displays where
gray is sent over the red channel.
Use Green Channel This mode is intended for grayscale displays where
gray is sent over the green channel.
Use Blue Channel This mode is intended for grayscale displays where
gray is sent over the blue channel.
To manually select a grayscale conversion mode:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Sources > Input Settings > DisplayPort 1/2, DVI 1/2 menu.
3. Enter the Grayscale Conversion submenu.
4. Select one of the available color conversion modes and con fi rm.
4.20 EDID format
About EDID format
The Nio Color 5MP supports two EDID formats: E-EDID V1.4 and DisplayID V1.3
To select the EDID format
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Sources > Input Settings menu.
3. Enter the EDID format submenu.
4. Select one of the available format and con fi rm.
4.21 EDID timings
About EDID timings
Following EDID timings are available for your Nio Color 5MP:
Resolution
Allows to manually modify the resolution of the
image source video input signal.
Refresh Rate Allows to manually select the refresh rate of the
image source video input signal depending on the
maximum refresh rate of the display controller
connected to your display.
Color Depth Allows to change the color depth to 8 or to 10 bit
(only when using DisplayPort input).
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Sources > Input Settings > DisplayPort 1/2, DVI 1/2 menu.
28 K5903146 NIO COLOR 5MP 24/05/2017