Barco NGS-D200, User Manual

Page: 83 / 90

Appendix VII: Safety and Compliance Statements
l
Do not use an accessory attachment which is not recommended by the manufacturer
l
Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and
unused for long
To prevent personal injury
l
To prevent injury and physical damage, always read this manual and all labels on the system before connecting to
the wall outlet or adjusting the device
l
To prevent injury, ensure that all covers are correctly installed.
See installation procedures
l
Before attempting to remove any of the device’s covers, you must turn off the device and disconnect from the wall
outlet
l
When required to switch off the device, to access parts inside, always disconnect the power cord from the power
net
l
The power input at the device side is considered as the disconnect device. When required to switch off the device,
to access parts inside, always disconnect the power cord at the device side. In case the power input at the device
side is not accessible, the socket outlet supplying the device shall be installed nearby the device and be easily
accessible, or a readily accessible general disconnect device shall be incorporated in the fixed wiring
l
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it
and possible injury to the user
To prevent fire hazard
l
Do not place flammable or combustible materials near the device!
l
Barco products are designed and manufactured to meet the most stringent safety regulations. This device radiates
heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and safe.
Exposing flammable or combustible materials into close proximity of this device could result in the spontaneous
ignition of that material, resulting in a fire. For this reason, it is absolutely necessary to leave an “exclusion zone”
around all external surfaces of the device whereby no flammable or combustible materials are present. The
exclusion zone must be not less than 40 cm (16”). Do not cover the device with any material while the device is in
operation. Keep flammable and combustible materials away from the device at all times. Mount the device in a well
ventilated area away from sources of ignition and out of direct sun light. Never expose the device to rain or moisture.
In the event of fire, use sand, CO2 or dry powder fire extinguishers. Never use water on an electrical fire. Always
have service performed on this device by authorized Barco service personnel. Always insist on genuine Barco
replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this device
l
Slots and openings in this equipment are provided for ventilation. To ensure reliable operation of the device and to
protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked
by placing the device too close to walls, or other similar surface. This device should never be placed near or over a
radiator or heat register. This device should not be placed in a built-in installation or enclosure unless proper
ventilation is provided
l
Let the device cool down completely before storing. Remove cord from the device when storing
l
Heat sensitive materials should not be placed in the path of the exhausted air
To prevent device damage
l
The device must always be installed in a manner which ensures free flow of air into its air inlets and unimpeded
evacuation of the hot air from its cooling system
l
In order to ensure that correct airflow is maintained, and that the device complies with Electromagnetic
Compatibility (EMC) requirements, it should always be operated with all of it’s covers in place
l
Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to
protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heat register. The device should not be placed in a built-in installation or enclosure unless proper
ventilation is provided
75
NGS-D200 User Guide