Barco MDSC-8532 User Manual Download Page 53

Page: 53 / 64

R5914105 /01 MDSC-8532

E346057

Indicates the device is approved according to the UL regulations for Canada and US.

E346057

Also Certified

UL60950-1 E92049

Medical –general medical equipment as to electrical shocks, fire and mechanical
hazards only in accordance with standards: ANSI/AAMI ES 60601-1:2005/(R)2012;
CSA CAN/CSA-C22.2 NO. 60601-1:14; Also certified UL60950-1 (E92049).

Indicates the device is approved according to the UL Demko regulations.

Indicates the device is approved according to the CCC regulations.

Indicates the device is approved according to the VCCI regulations.

Indicates the device is approved according to the KC regulations.

Indicates the device is approved according to the BSMI regulations.

Indicates the device is approved according to the PSE regulations.

Indicates the device is approved according to the RCM regulations.

Indicates the device is approved according to the EAC regulations.

Caution: Federal law (United Stated of America) restricts this device to sale by or on the
order of a licensed healthcare practitioner.

IS 13252 (Part 1)

IEC 60950-1

R-xxxxxxxx

www.bis.gov.in

Indicates the device is approved according to the BIS regulations.

Indicates the device is approved according to the INMETRO regulations.

Important information

Summary of Contents for MDSC-8532

































































Search results

Summary of Contents for MDSC-8532

Reviews:

Related manuals for MDSC-8532

Brands by name

Popular brands

Barco MDSC-8532, User Manual

Search results

Summary of Contents for MDSC-8532

Reviews:

Related manuals for MDSC-8532

Brands by name

Popular brands