Barco MDSC-8532, User Manual

Page: 34 / 64

R5914105 /01 MDSC-8532 34
Primary
input
Secondary input
DP 1.2 SST HDMI-1 HDMI-2 DVI 3G-SDI 4K-SDI (**)
DP 1.2 SST
(*) Yes Yes Yes Yes Yes Yes
HDMI-1 Yes Yes Yes Yes Yes Yes
HDMI-2 Yes Yes Yes Yes Yes No
DVI Yes Yes Yes Yes Yes Yes
3G-SDI Yes Yes Yes Yes Yes Yes
4K-SDI (**) Yes Yes No Yes Yes No
(*) No PIP with DP 1.2 MST
(**) MDSC-8532 12GP version
Gamma and Color temperature for the PiP Source are always set to Native and 6500 K
independently from the Transfer Function applied to the Primary input Source.
To select Picture-in-Picture input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PiP Input submenu.
4. Select the value for each of the following options:
- PIP Mode (ON / OFF)
- PIP Source (select input)
- PIP Position (Bottom Right, Top Right, Bottom Left, Top Left)
- PIP Size (Small, Medium, Large, Max)
- PIP Swap (ON / OFF)
- PIP Transparency (Range 0 – 10)
4.4 Configuration menu
4.4.1 Information
About information
The available information items for your display are:
• Model: commercial type identification
• Main board release: firmware identification
• Keyboard release: firmware identification
• SDI module release: hardware and firmware identification
• USB module revision
• DP splitter revision
• SW package ID
To access information
1. Bring up the OSD main menu.
2. Navigate to the
Configuration menu.
3. Enter the Information submenu.
Advanced operation