Barco MDSC-8258 User Manual Download Page 35 | Manualshive

Page: 35 / 44

background image

6. Important information

Indicates the device meets the requirements of the applicable EC directives.

Indicates compliance with Part 15 of the FCC rules (Class A or Class B)

Indicates the device is approved according to the UL Recognition regulations

Indicates the device is approved according to the UL Demko regulations

Indicates the device is approved according to the CCC regulations

Indicates the device is approved according to the VCCI regulations

Indicates the device is approved according to the KC regulations

Indicates the device is approved according to the BSMI regulations

Indicates the USB connectors on the device

Indicates the DisplayPort connectors on the device

Indicates the manufacturing date

Indicates the temperature limitations

1

for the device to safely operate within specs.

Indicates the device serial no

Warning

: dangerous voltage

Caution

Consult the operating instructions

1. Values for xx and yy can be found in the technical specifications paragraph.

(451920611502) K5902088 MDSC-8258 08/09/2014

33

«
...
33
34
35
36
37
...
»

Summary of Contents for MDSC-8258













































Reviews:

No comments

Related manuals for MDSC-8258

Brand: babymoov Pages: 48

Brand: Tanaka Pages: 21

Brand: Yaesu Pages: 8

Brand: Siko Pages: 2

Brand: Gator Pages: 6

Brand: Hanns.G Pages: 1

Brand: i3-TECHNOLOGIES Pages: 12

Brand: F&F Pages: 16

Brand: Feelworld Pages: 7

Brand: WINGTOP Pages: 33

Brand: NA-DE Pages: 4

Brand: Bellman & Symfon Pages: 76

Brand: Crivit Pages: 36

Brand: American Dynamics Pages: 2

Brand: Leyard Pages: 27

Brand: Feelworld Pages: 22

med I BS 90 varius privat

Brand: boso Pages: 40

Lt Sensors Series

Brand: ADInstruments Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands