![background image](http://html1.mh-extra.com/html/barco/mdng-5221/mdng-5221_user-manual_4047422015.webp)
3. Display installation
W
ARNING
:
Use an arm that is approved by VESA (according to the VESA 100 mm stan-
dard).
Use an arm that can support the weight of the display. Refer to the technical speci
fi
ca-
tions of this display for the applicable weight.
Overview
The panel, standard attached to the tilt & swivel foot, is compatible with the VESA 100 mm standard. So
it can be used with an arm stand according to the VESA 100 mm standard.
Therefore, the tilt & swivel foot must be removed from the panel.
1. Put the display in the lowest position and fasten the height mechanism, see "Unlocking the height
2. Put the display face down on a clean and soft surface. Be careful not to damage the panel screen.
3. Remove the plastic cover with a
fl
athead screw driver.
4. Slide the plastic cover over the neck of the foot.
K5902091 NIO 5MP LED DISPLAY 09/01/2015
13
Summary of Contents for MDNG-5221
