5. Advanced operation
No Conversion
Use Red Channel
This mode is intended for grayscale displays where
gray is sent over the red channel.
Use Green Channel
This mode is intended for grayscale displays where
gray is sent over the green channel.
Use Blue Channel
This mode is intended for grayscale displays where
gray is sent over the blue channel.
Use All Channels
This mode is intended for grayscale displays where
gray is sent over the red, green and blue channel.
This is done by means of a standard conversion
mechanism where 30% red, 59% green and 11%
blue are used to generate gray.
To manually select a grayscale conversion mode:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Image Source
menu.
3. Enter the
Grayscale Conversion
submenu.
4. Select one of the available color conversion modes and con
fi
rm.
5.24 EDID timings
About EDID timings
Following EDID timings are available for your Mammo Tomosynthesis:
Refresh Rate
Allows to manually select the refresh rate of the
image source video input signal depending on the
maximum refresh rate of the display controller
connected to your display.
Preferred Orientation
Allows to change the orientation of the image
source video input signal to landscape, portrait or
to let the display automatically assign the correct
orientation.
Color Depth
Allows to change the color depth to 8 or to 10 bit.
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Image Source
menu.
3. Enter the
Timings
submenu.
4. Select
Refresh Rate, Preferred Orientation
or
Color Depth
.
5. Select one of the available settings and con
fi
rm.
5.25 Display info
About display info
Your display serial number, color type, native resolution,
fi
rmware versions, etc. are available in a dedi-
cated submenu of the OSD menu.
K5902035
MAMMO
TOMOSYNTHESIS
07/12/2017
35
