![background image](http://html1.mh-extra.com/html/barco/mdcg-10130/mdcg-10130_user-manual_4031365030.webp)
5. Advanced operation
Image scaling is only possible when the resolution of your display’s video input signal
is less than or equal to half the maximum resolution of the display.
To enable/disable image scaling:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Image Source
menu.
3. Enter the
Scaling
submenu.
4. Select
Enabled/Disabled
as desired and con
fi
rm.
5.18 Image source selection modes
About image source selection modes
Your Coronis Fusion 10MP automatically detects the number of video input signals connected, attaches
them to the correct display side and applies the correct video settings to it (resolution, video encoding
mode, refresh rate,...). However, it may be needed to manually select the video input signal(s) to be
displayed on a certain display side or to adjust certain video settings yourself. The start to this is selecting
one of the following image source selection modes available for your display:
Automatic
In this mode, your display automatically detects the
connected video input signals, attaches them to the
correct display side and applies the correct video
settings to it (resolution, video encoding mode,
refresh rate,...). No video settings are available
when this mode is selected.
One Image Source
This mode is intended for displaying and manually
con
fi
guring only one connected video input signal.
When selecting this mode, the video settings
become available for the selected video input
signal.
Two Image Sources
This mode is intended for displaying and manually
con
fi
guring two connected video input signals (one
on each display side). When selecting this mode,
the video settings become available for the selected
video input signal on each side of the display.
To select an image source selection mode:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Image Sources
menu.
3. Enter the Image
Source Selection
submenu.
4. Select one of the available image source selection modes and con
fi
rm.
26
K5902031 CORONIS FUSION 10MP 28/08/2013
Summary of Contents for MDCG-10130
