3. Display installation
4. Unscrew the four
fi
xation screws
fi
xing the panel to the stand.
5. Attach the panel
fi
rmly to the arm using 4 screws M4 x 10 mm.
3.9
First time starting up
Overview
You are now ready to start up your Coronis Fusion 10MP for the
fi
rst time.
1. Switch on your Coronis Fusion 10MP as described in "Stand-by switching", page 16.
2. Turn on the computer connected to your display.
If you have properly installed your display and display controller, the Windows start-up messages will
appear once the boot procedure is
fi
nished.
Your Coronis Fusion 10MP will be running in a basic video mode at a default refresh rate
when
fi
rst time starting up. If you are using a Barco display controller, please consult
the user guide delivered with it to install the drivers, software and documentation. When
this is done, your display will automatically detect the connected video input signal(s)
and apply the correct video mode and refresh rate.
14
K5902031 CORONIS FUSION 10MP 28/08/2013
Summary of Contents for MDCG-10130
