Barco MDCC-6430, User Manual

Page: 51 / 60

K5902108-04 Coronis Fusion 4MP / 6MP 51
Recommended separation distance
The Coronis Fusion 4MP / 6MP is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer of the user of the Coronis Fusion 4MP / 6MP can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Coronis Fusion 4MP / 6MP as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter 8
(W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d=1.2 √ P
80 MHz to 800 MHz
d=1.2 √ P
800 MHz to 2.7 GHz
d=2.3 √ P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
7.5 Explanation of symbols
Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
Indicates compliance with Part 15 of the FCC rules (Class A or Class B)
Indicates the device is approved according to the UL regulations
Indicates the device is approved according to the UL regulations for Canada and US
E352529
Indicates the device is approved according to the UL regulations for Canada and US
Indicates the device is approved according to the UL Demko regulations
S&E
Indicates the device is approved according to the CCC regulations
Indicates the device is approved according to the VCCI regulations
Important information
8: For transmitters rated at a maximum output power not listed, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter. Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.