Barco MDCC-6430 User Manual Download Page 52

Page: 52 / 60

K5902108-04

Coronis Fusion 4MP / 6MP

Indicates the device is approved according to the KC regulations

Indicates the device is approved according to the BSMI regulations

Indicates the device is approved according to the PSE regulations

Indicates the device is approved according to the EAC regulations

Caution: Federal law (United Stated of America) restricts this device to sale by or on
the order of a licensed healthcare practitioner.

Indicates the USB connectors on the device

Indicates the DisplayPort connectors on the device

Indicates the legal manufacturer

Indicates the manufacturing date

Indicates the temperature limitations

for the device to safely operate within specs

Indicates the device serial number

REF

Indicates the device part number or catalogue number

Warning

: dangerous voltage

Caution

Consult the operating instructions

Indicates this device must not be thrown in the trash but must be recycled, according
to the European WEEE (Waste Electrical and Electronic Equipment) directive

Important information

Values for xx and yy can be found in the technical specifications paragraph.

Summary of Contents for MDCC-6430





























































Search results

Summary of Contents for MDCC-6430

Reviews:

Related manuals for MDCC-6430

Brands by name

Popular brands

Barco MDCC-6430, User Manual

Search results

Summary of Contents for MDCC-6430

Reviews:

Related manuals for MDCC-6430

Brands by name

Popular brands