5. Mechanical setup of display wall with pedestals
5.3
Connection concept
The pictures show the connection concept implemented in the KVD5521video wall.
In vertical direction, all connections are made via T-bar connectors which come inserted into the profile.
The T-bar connector features 4 headless screws which we will number 1, 2, 4, 3, starting at the bottom. It
comes with the bottom screw (1) and top screw (3) fixed.
These screws need to be loosened to shift up the T-bar connector.
When it had been shifted up it is fixed again by the bottom screw (1) – and only by the bottom screw. The
screw is not fully tightened so that the T-bar connector can still "rattle".
Before placing another system on top, the connection plates need to be inserted. There are two types of
connection plates: single (to be placed on the outer left/right profile, and double (to be placed on horizon-
tally adjacent profiles).
When the connection plates are in place the screw (2) gets fixed, but
only at the front of the video wall.
Subsequently the next system is placed on top of the current one.
The screw
(3) gets fixed, on the front and on the rear side of the video wall.
Subsequently the screw (4) gets fixed (front and rear side) as well as the screw (2) on the rear side.
Barco - LCD 5521 V4 - R591734 - Installation manual - Revision 00 - March-2017 _____________________________________________________________ 32
