1. Preliminary Remarks
•
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
•
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
•
Do not touch the power cord with wet hands. If the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off.
•
Fix the power cable completely.
•
Do not unplug the power cord while the product is in use.
•
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even
if the unit is turned off.
•
If an extension cord is used with this product, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating. Also make sure that the
total of all products plugged into the wall outlet does not exceed 15 amperes.
•
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electrical shock.
•
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the
set and have it checked by qualified service personnel before resuming operations.
•
Lightning - For added protection for this video product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the display
due to lightning and AC power-line surges.
Do not place flammable or combustible
materials near the display!
Ne placez pas de matériaux inflammables ou
combustibles près de l'écran!
Transportation
•
Any transportation of the unopened unit in its packaging should be done by two persons.
•
In transportation or storage of products in original packing, NEVER stack more than the number stated on the
carton box. This warning is also indicated on the side of the card box.
•
For transportation or storage, observe the warnings and instructions on the side of the card box.
Nearby equipment
If air conditioning ducts or lamps, etc. are located near the installation site, the attendant dust, extreme temper-
atures, humidity, and condensation may become sources of trouble. Please take sufficient steps to avoid this.
Installation places
Do not install the unit where it may be easily touched or leaned against. Avoid locations subject to high vibra-
tions or severe impacts. Do not install the unit where it is exposed to humidity, oil, smoke or excessive dust.
Mount the display in a well ventilated area away from sources of ignition and out of direct sun light. Never ex-
pose this product to rain or excessive moisture.
If you install the product in a place where there is an abundance of fine dust, chemical substances are used, the
temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long
period of time this might cause serious damage to the product's picture quality, life cycle and appearance.
Install the unit on a neat and dry place.
Install the unit on a flat and stable place.
Operating the product
Take a rest from time to time to protect your vision.
Take a regular break when working with the product for a long time.
Keep the proper distance from the product. Your vision may be impaired if you look at the product too closely.
Using headsets (earphones) for a long time or listening loudly can cause damage to your hearing.
Barco - LCD 5521 V4 - R591734 - Installation manual - Revision 00 - March-2017
__________________________________________________________________________
12
