6. Controlling and managing an OVD/KVD/IVD display wall
6.4
Brightness
On the Brightness panel you set the brightness of the backlight. For maximum brightness performance push the
slider to the right, for more economic operation set the backlight to lower levels and push the slider to the left.
The brightness linearly scales along with the backlight level.
In
NATIVE
mode, brightness can be set in the range from 0 to +100 (like in the web interface of the device).
In SenseX operation mode, values in the BRIGHTNESS control panels are in cd/m². The current brightness value is
written in big. The available range to set brightness is indicated by the grey bar.
The brightness is not adjusted during pushing the slider but only if the set value is fix for 5 seconds. Only then
the adjustment is triggered.
Brightness adjustment to the set value is also triggered when navigating to this page or when refreshing (F5)
the content of this page.
The target brightness is applied to all displays; however due to production tolerances of the displays the display
wall might still show some inhomogeneity in brightness. Thus brightness adjustment of the individual displays
might be required.
Adjusting the brightness of a single display offers a slider for individual brightness adjustment.
Please note that it takes some time until all displays and properties are updated. F5
(refreshing browser window) does not help.
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
_______________________________________________
53