3. Network integration
The addresses in the DCHP Permanent IP table are only valid / active after they had been
added to the DHCP server configuration table and after the DHCP server has been
restarted.
Restarting the DHCP server is done by clicking Apply on the page Wall DHCP.
The command
Add
inserts a new blank record into the permanent IP table. This allows entering the MAC address
and the IP address from scratch.
The command
Delete
removes a record from the permanent IP table.
Add
and
Delete
affect the table on the web page only.
The entries of the table are written to the DHCP server configuration table only in case
Apply
has been clicked.
This command restarts the DHCP server. A request to reboot the projection modules is displayed.
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
_______________________________________________
15