R5915190 /00
IEX
28
IEX SE
R
IES
3.2 Starting the Hardware
Start the control PC Windows system. After the graphics card driver is activated, set
graphics card of the control PC to replication mode and confirm that the green indicator
of the sending box is blinking normally (blinking once per second).
Figure 3-1 Replication Mode
3.3 Software Control Setting
3.3.1 Installing the Software
Open the optical disk provided for the delivered products. Install the LED control
software
Nova
LCT
-Mars
stored in the optical disk to the control PC. Then install
Nova
Studio.
NOTE: You can follow the software installation wizard to install the software.
Summary of Contents for IEX Series
